Applications

Our plug-in hybrid system was designed for medium and heavy duty truck applications. Odyne has developed 14kW and 28kW systems. These systems can be used on a wide variety of truck applications, such as: 

• Bucket Trucks
• Compressors
• Digger Derricks
• Dump Trucks
• Mobile Cranes
• Mobile Shredders
• Refrigeration Trucks
• Refuse Trucks
• Septic Trucks
• Tanker Trucks

Plug-In Hybrid System Specifications:
• 14 or 28 kWh battery capacity
• Engine powered recharge capability
• 69 hp (51 kW) continuous motor, 107 hp (80 kW) peak, regeneration, and propulsion assist
• Plug recharge time: approximately 8 hours
• 220 VAC, single-phase charging station, Level 1 or Level 2 110/220VAC
• Lithium-ion battery pack(s)

Options that operate using power from the battery system:
• 13,500 Btu A/C
• 7,500 Btu electric or diesel heater
• Up to 7kW exportable power

Odyne works collaboratively with you to identify and understand your needs resulting in the best possible solution.

Odyne can provide a plug-in hybrid system on almost any chassis:

→ Odyne installs a plug-in hybrid system on a chassis and then ships the chassis to a final stage manufacturer.

→ Odyne can provide a complete vehicle solution working through its partners.

Below are examples of various applications.

Odyne Hybrid Powered Truck with Compressor
Underdeck hydraulically driven VANAIR compressor mounted on an IHC 4300 4x2 chassis

 
Odyne Hybrid Powered Digger Derrick
C4047 Terex digger derrick mounted on an IHC DuraStar 4x2 chassis

Odyne Hybrid Power Truck with Fassi Articulated Crane

Fassi F80 articulating crane mounted on an IHC DuraStar 4x2 chassis

 Niscource Truck
Terex TL41M mounted on an IHC DuraStar 4x2 chassis

Hybrid Digger Derrick

Hybrid digger derrick ORA digger with turret mounted winch on IHC 4x2 chassis

c4047 bucket truck

Hybrid 55' overcenter material handler mounted on an IHC 4300 4x2 chassis

 
 

There are many incentives to purchase a hybrid system. Check out our tax credits and incentives page for more information.

Our Plug-In Hybrid system has launch assist & regenerative braking. The electric motor generator slows the vehicle & uses "captured" energy to recharge the battery system.

Need more information? Take a look at our Corporate Brochure, or contact us at 262.544.8405.

The battery of our
plug-in hybrid system can be recharged three different ways.

Watch our
latest video!

 

Odyne is featured in the GTA Member Profile for December.